Scantech ORION O-3050 Bedienungsanleitung PDF herunterladen (Seite 25)

Installing the ORION O-3050

2.3 INSTALLING THE SCANNER ON A COUNTER SURFACE

To install the scanner without the flexible scanner stand, follow the instructions

below.

1. Remove the two rubber feet from the back cover. Lead the communication

cable and power supply cable through the slit. Fasten the back cover to the

surface with two screws as illustrated in the figure.

NOTE

 You can use the back cover as a template to mark the places

for the mounting holes at the counter surface and drill two

holes.

 If you do not want to drill holes in the counter top, the scanner

can be installed without fixing it to the surface. In this case the

rubber feet will prevent the scanner from sliding.

2. Position the scanner as indicated in the figure below and rotate the scanner

around the cover. Make sure that connectors and cables are placed as

indicated in the figures, to allow easy attachment of the scanner to the back

cover. Press the scanner until a "click" is heard.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 40 41

Keine Kommentare

Scantech ORION O-3050 Bedienungsanleitung Seite 25